M-57 - camera: ATK - 2 HS - taken by Mario Weigand

 ATiK CCD Cameras - Powerful And Affordable All-Purpose Cameras

ATiK CCD cameras offer many advantages and an extraordinary value for money. Semi-professional astro-imaging becomes affordable with these cameras!

Some of the Great Features of ATiK Cameras:

- Integrated cooling system for less "noise" during long exposure times
- highly sensitive and powerful SONY chips
  On the monochrome cameras you can use LRGB filters for colour images.
- very good results for planetary and lunar imaging. You can use contrast-boosting filters
- efficient amplifier control for noise suppression
- simple adaptation to any telescope using the T-2 thread and 1.25" barrels

--   CCD Cameras

--   Accessories for ATiK Cameras


CCD Cameras

ATiK - 1C
colour camera
Chip D=4.5mm		 ATiK - 2C
colour camera
Chip D=6mm		 ATiK - 1HS
 high sensitivity monochrome camera
Chip D=4.5mm		 ATiK - 2HS
 high sensitivity monochrome camera
Chip D=6mm		 ATiK - 16 and ATiK 16HR
professional monochrome cameras
large chip

ATiK - 1C
colour camera - chip D=4.5mm

ATiK - 1C - Colour Camera

This low-cost 24-Bit colour camera enables you to take high quality colour images of Deep Sky objects, the moon and the planets. Especially on fast telescopes or tele-lenses this camera will bring excellent results.

The CCD chip has a format of 640x480 pixels, the pixel size is 5.6um.

Noise Reduction
The ATiK cameras have a sophisticated amp control which reduces the background noise visible in the upper left corner of the image. The camera features an active air cooling for further reduction of the thermal noise during long exposure times. As a consequence the ATiK cameras reach a better signal-to-noise ratio.

Design Features
The camera is compact. The cooling fan is embedded into the body so that it cannot be damaged by accident. A four meter long cable connects the camera with the computer - this allows you to set up the computer at a comfortable distance from the telescope.

Telescope Connection
The camera has a T2 female thread (M42x0.75). This allows you to use a multitude of T2 accessories like tele-lenses, eyepiece projection adaptors, ... In addition a 1.25" adaptor is included. Thus you can attach the camera directly to your telescope.

Videos Taken With the ATiK Camera
You can even take films with the ATiK Cameras. Exposure times range from 0.5 seconds to infinite. Afterwards you can use programs like GIOTTO to stack the images - the resulting very high resolution especially for moon and planets offers and image quality unheard of a few years ago!

Autoguiding
You can use the ATiK cameras for autoguiding. The K3 CCD software is included in the scope of delivery. You can also use other softwares like e.g. IRIS, Astrosnap, Guidedog, ... and of course MAXIM DL.

Long Exposure Photography
You can also take long exposure photographies with the ATiK cameras. For this you will need both a USB and a serial port on your computer. Power supply is through the USB cable while the image data are transmitted through the serial cable. For short exposure times you can use either USB or the serial port.

ATK-1C - Specifications:
CCD Chip
CCD - Sony ICX-098BQ (Data Sheet)
Chip diagonal
4.5mm - diagonal
Horizontal resolution
640 pixels
Vertical resolution
480 pixels
Pixel size
5.6 x 5.6 um
Computer ports
USB and Parallel Port
Max. Frame Rate
60fps @ 320x240 (fast mode)
Power supply
USB - no separate power supply needed
Max. Exposure time
unlimited
Min. Exposure time
1/10,000s (Fast Mode) / 0.5s
Possible exposure times
Fast Mode - 1/25s to 1/10,000s
Cooling
Active air cooling
Dimensions
50x68 mm (w/o 1.25" adaptor)
Weight
430 grams (incl. cable)


M - 17 - durch die ATK - 1C
Recommended Accessories:
T2 Filter Support Kit
for LRGB imaging
further information		 IR Cut Filter
should be used if any lenses are between the camera and the object
further information		 0.5x Focal Reducer
for faster images and larger fields of view
further information		 Carry Case for ATiK Cameras
for safe storage and transport
further information		 Parallel-Serial Adaptor
allows the ATiK camera to be connected to a serial port
further information		 Camera Lens Adaptors
for your ATiK camera
further information

Images Taken with the ATiK 1C

Using the ATiK on a MAC Computer
Link to a free download page

 Price
 
Item No. Short description Price - Euros incl. VAT
ATK 1C CCD colour camera - chip diagonal 4.5mm
T-mount & 1.25" barrel		 299.-

Please send requests or online orders to: info@teleskop-service.se



ATiK - 2C
colour camera - chip D=6mm


 

ATiK - 2C - Colour Camera

This low-cost 24-Bit colour camera enables you to take high quality colour images of Deep Sky objects, the moon and the planets. The camera has a highly sensitive chip - you can use it on telescopes with a slower f-ratio.

The CCD chip has a format of 640x480 pixels, the pixel size is 7.4um.

Noise Reduction
The ATiK cameras have a sophisticated amp control which reduces the background noise visible in the upper left corner of the image. The camera features an active air cooling for further reduction of the thermal noise during long exposure times. As a consequence the ATiK cameras reach a better signal-to-noise ratio.

Design Features
The camera is compact. The cooling fan is embedded into the body so that it cannot be damaged by accident. A four meter long cable connects the camera with the computer - this allows you to set up the computer at a comfortable distance from the telescope.

Telescope Connection
The camera has a T2 female thread (M42x0.75). This allows you to use a multitude of T2 accessories like tele-lenses, eyepiece projection adaptors, ... In addition a 1.25" adaptor is included. Thus you can attach the camera directly to your telescope.

Videos Taken With the ATiK Camera
You can even take films with the ATiK Cameras. Exposure times range from 0.5 seconds to infinite. Afterwards you can use programs like GIOTTO to stack the images - the resulting very high resolution especially for moon and planets offers and image quality unheard of a few years ago!

Autoguiding
You can use the ATiK cameras for autoguiding. The K3 CCD software is included in the scope of delivery. You can also use other softwares like e.g. IRIS, Astrosnap, Guidedog, ... and of course MAXIM DL.

Long Exposure Photography
You can also take long exposure photographies with the ATiK cameras. For this you will need both a USB and a serial port on your computer. Power supply is through the USB cable while the image data are transmitted through the serial cable. For short exposure times you can use either USB or the serial port.Rauschunterdrückung
Die ATK Kameras enthalten außerdem ein Verstärkungskontrollsystem, um das am oberen linken Bildrand erkennbare Hintergrundrauschen zu unterdrücken. Die Kamera beinhaltet eine Luftkühlung zur deutlichen Reduzierung des thermisch bedingten Rauschens bei Langzeitbelichtungen. Dadurch wird ein besseres Signal - Rauschverhalten erreicht.

The High-Sensitivity Chip
This camera is based on the particularly sensitive Sony ICX-424 AQ chip. Its high sensitivity allows you to use telescopes with a slower f-ratio. In addition the chip size is approx. 55% larger than the ATiK 1C. The chip diagonal is 6mm. As a consequence you can use telescopes with a longer focal length or can take images of larger objects.

Left Image:   .......   The smaller rectangle shows the chip of the ATiK 1C and ATiK 1HS cameras compared with the larger rectangle of the ATiK 2C and ATiK 2HS.

ATK-2C - Specifications:

CCD Chip
CCD - Sony ICX-424AQ (Data Sheet)
Chip diagonal
6mm - diagonal
Horizontal resolution
640 pixels
Vertical resolution
480 pixels
Pixel size
7.4 x 7.4 um
Computer ports
USB and Parallel Port
Max. Frame Rate
10fps @ 320x240 (fast mode)
Power supply
USB - no separate power supply needed
Max. Exposure time
unlimited
Min. Exposure time
1/10,000s (Fast Mode) / 0.5s
Possible exposure times
Fast Mode - 1/25s to 1/10,000s
Cooling
Active air cooling
Dimensions
50x68 mm (w/o 1.25" adaptor)
Weight
430 grams (incl. cable)


M - 27 - durch die ATK - 2C
Recommended Accessories:
T2 Filter Support Kit
for LRGB imaging
further information		 IR Cut Filter
should be used if any lenses are between the camera and the object
further information		 0.5x Focal Reducer
for faster images and larger fields of view
further information		 Carry Case for ATiK Cameras
for safe storage and transport
further information		 Parallel-Serial Adaptor
allows the ATiK camera to be connected to a serial port
further information		 Camera Lens Adaptors
for your ATiK camera
further information

Images Taken with the AiK 2C

Using the ATiK on a MAC Computer
Link to a free download page

Price
 
Item No. Short description Price - Euros incl. VAT
ATK 2C CCD colour camera - chip diagonal 6mm
T-mount & 1.25" barrel		 519.-

Please send requests or online orders to: info@teleskop-service.se



ATiK - 1HS
 high sensitivity monochrome camera - chip D=4.5mm

ATiK - 1HS - Monochrome Camera

Moon, Sun and Planets
With this all-purpose cameras you can take high quality images of the objects within our solar system. You can use narrowband contrast filters, e.g. Baader contrast filters (further information on the Baader filters).

Nebulae and Galaxies
The chip is extremely sensitive. This allows you to take excellent images of faint nebulae and galaxies. You can even take colour images by using LRGB filters: You take four separate images with dedicated colour filters and stack the images in your computer. We of course offer the needed LRGB filters:
--- Baader CCD Filters (German Page) ---- Astronomik CCD Filters --- The filter support kit and the new filter wheel (see recommended accessories) are a great help for LRGB imaging. They allow you to exchange the filters much more easily without having to take the camera out of the telescope.

Noise Reduction
The ATiK cameras have a sophisticated amp control which reduces the background noise visible in the upper left corner of the image. The camera features an active air cooling for further reduction of the thermal noise during long exposure times. As a consequence the ATiK cameras reach a better signal-to-noise ratio.

Design Features
The camera is compact. The cooling fan is embedded into the body so that it cannot be damaged by accident. A four meter long cable connects the camera with the computer - this allows you to set up the computer at a comfortable distance from the telescope.

Telescope Connection
The camera has a T2 female thread (M42x0.75). This allows you to use a multitude of T2 accessories like tele-lenses, eyepiece projection adaptors, ... In addition a 1.25" adaptor is included. Thus you can attach the camera directly to your telescope.

Videos Taken With the ATiK Camera
You can even take films with the ATiK Cameras. Exposure times range from 0.5 seconds to infinite. Afterwards you can use programs like GIOTTO to stack the images - the resulting very high resolution especially for moon and planets offers and image quality unheard of a few years ago!

Autoguiding
You can use the ATiK cameras for autoguiding. The K3 CCD software is included in the scope of delivery. You can also use other softwares like e.g. IRIS, Astrosnap, Guidedog, ... and of course MAXIM DL.

Long Exposure Photography
You can also take long exposure photographies with the ATiK cameras. For this you will need both a USB and a serial port on your computer. Power supply is through the USB cable while the image data are transmitted through the serial cable. For short exposure times you can use either USB or the serial port.

ATK-1HS - Specifications:

CCD Chip
CCD - Sony ICX-098BL (Data Sheet)
Chip diagonal
4.5mm - diagonal
Horizontal resolution
640 pixels
Vertical resolution
480 pixels
Pixel size
5.6 x 5.6 um
Computer ports
USB and Parallel Port
Max. Frame Rate
60fps @ 320x240 (fast mode)
Power supply
USB - no separate power supply needed
Max. Exposure time
unlimited
Min. Exposure time
1/10,000s (Fast Mode) / 0.5s
Possible exposure times
Fast Mode - 1/25s to 1/10,000s
Cooling
Active air cooling
Dimensions
50x68 mm (w/o 1.25" adaptor)
Weight
430 grams (incl. cable)


NGC 7662 - blue Snowball  - ATK - 1HS - M. Weigand
Recommended Accessories:
T2 Filter Support Kit
for LRGB imaging
further information		 IR Cut Filter
should be used if any lenses are between the camera and the object
further information		 0.5x Focal Reducer
for faster images and larger fields of view
further information		 Carry Case for ATiK Cameras
for safe storage and transport
further information		 Parallel-Serial Adaptor
allows the ATiK camera to be connected to a serial port
further information		 Camera Lens Adaptors
for your ATiK camera
further information


1.25" LRGB Filter
for 3 colour composit images
further information

Images Taken with the ATiK 1HS Camera

Using the ATiK on a MAC Computer
Link to a free download page

Price
 
Item No. Short description Price - Euros incl. VAT
ATK 1HS CCD monochrome camera - chip diagonal 4.5mm
T-mount & 1.25" barrel		 398.-

Please send requests or online orders to: info@teleskop-service.se



ATiK - 2HS
 high sensitivity monochrome camera - chip D=6mm


 

ATiK - 2HS - Monochrome Camera

Moon, Sun and Planets
With this all-purpose cameras you can take high quality images of the objects within our solar system. You can use narrowband contrast filters, e.g. Baader contrast filters (further information on the Baader filters).

Nebulae and Galaxies
The chip is extremely sensitive. This allows you to take excellent images of faint nebulae and galaxies. You can even take colour images by using LRGB filters: You take four separate images with dedicated colour filters and stack the images in your computer. We of course offer the needed LRGB filters:
--- Baader CCD Filters (German Page) ---- Astronomik CCD Filters --- The filter support kit and the new filter wheel (see recommended accessories) are a great help for LRGB imaging. They allow you to exchange the filters much more easily without having to take the camera out of the telescope.

The chip of the ATiK 2HS (6mm diagonal) is larger than that of the 1HS (4.5mm diagonal). This means that you can use the camera on telescopes with a longer focal length or take images of larger objects.

Noise Reduction
The ATiK cameras have a sophisticated amp control which reduces the background noise visible in the upper left corner of the image. The camera features an active air cooling for further reduction of the thermal noise during long exposure times. As a consequence the ATiK cameras reach a better signal-to-noise ratio.

Design Features
The camera is compact. The cooling fan is embedded into the body so that it cannot be damaged by accident. A four meter long cable connects the camera with the computer - this allows you to set up the computer at a comfortable distance from the telescope.

Telescope Connection
The camera has a T2 female thread (M42x0.75). This allows you to use a multitude of T2 accessories like tele-lenses, eyepiece projection adaptors, ... In addition a 1.25" adaptor is included. Thus you can attach the camera directly to your telescope.

Videos Taken With the ATiK Camera
You can even take films with the ATiK Cameras. Exposure times range from 0.5 seconds to infinite. Afterwards you can use programs like GIOTTO to stack the images - the resulting very high resolution especially for moon and planets offers and image quality unheard of a few years ago!

Autoguiding
You can use the ATiK cameras for autoguiding. The K3 CCD software is included in the scope of delivery. You can also use other softwares like e.g. IRIS, Astrosnap, Guidedog, ... and of course MAXIM DL.

Long Exposure Photography
You can also take long exposure photographies with the ATiK cameras. For this you will need both a USB and a serial port on your computer. Power supply is through the USB cable while the image data are transmitted through the serial cable. For short exposure times you can use either USB or the serial port.Videosequenzen mit ATIK
Mit der ATIK können Sie auch Videosequenzen mit Belichtungszeiten ab 0,5 Sekunden bis beliebig aufnehmen. Danach können Sie mit Programmen, wie GIOTTO ... die Bilder übereinanderlegen und erreichen so eine sehr hohe Auflösung, insbesondere im Bereich Mond und Planeten.

Nutzung für Autoguiding

The High-Sensitivity Chip
This camera is based on the particularly sensitive Sony ICX-424 AL chip. Its high sensitivity allows you to use telescopes with a slower f-ratio. In addition the chip size is approx. 55% larger than the ATiK 1C. The chip diagonal is 6mm. As a consequence you can use telescopes with a longer focal length or can take images of larger objects.

Left Image:   .......   The smaller rectangle shows the chip of the ATiK 1C and ATiK 1HS cameras compared with the larger rectangle of the ATiK 2C and ATiK 2HS.

ATK-2HS - Specifications:
CCD Chip
CCD - Sony ICX-424AL (Data Sheet)
Chip diagonal
6mm - diagonal
Horizontal resolution
640 pixels
Vertical resolution
480 pixels
Pixel size
7.4 x 7.4 um
Computer ports
USB and Parallel Port
Max. Frame Rate
10fps @ 320x240 (fast mode)
Power supply
USB - no separate power supply needed
Max. Exposure time
unlimited
Min. Exposure time
1/10,000s (Fast Mode) / 0.5s
Possible exposure times
Fast Mode - 1/25s to 1/10,000s
Cooling
Active air cooling
Dimensions
50x68 mm (w/o 1.25" adaptor)
Weight
430 grams (incl. cable)


Trifid Nebel - ATK 2HS - Astronomik Filter - P. Monta
Recommended Accessories:
T2 Filter Support Kit
for LRGB imaging
further information		 IR Cut Filter
should be used if any lenses are between the camera and the object
further information		 0.5x Focal Reducer
for faster images and larger fields of view
further information		 Carry Case for ATiK Cameras
for safe storage and transport
further information		 Parallel-Serial Adaptor
allows the ATiK camera to be connected to a serial port
further information		 Camera Lens Adaptors
for your ATiK camera
further information


1.25" LRGB Filter
for 3 colour composit images
further information

Images Taken With the ATiK 2HS Camera

Using the ATiK on a MAC Computer
Link to a free download page

Price
 
Item No. Short description Price - Euros incl. VAT
ATK 2 HS CCD monochrome camera - chip diagonal 6mm
T-mount & 1.25" barrel		 499.-

Please send requests or online orders to: info@teleskop-service.se



Two New Powerful ATiK Cameras ... ATiK 16 and ATiK 16HR
large and powerful high-resolution high-sensitivity chip


 

ATiK-16 and ATiK 16HR (High Resulution) - Monochrome Cameras with Large Chips

The large high-performance chips used in these cameras are ideally suited for astro-imagers looking for larger fields of view. Both CCD cameras resemble a large improvement on a high level of quality and performance.

Both cameras have an excellent value for money - just compare the features and the chips with other brand cameras!

Astro Imaging
The large chip is obviously very attractive for taking images of large areas on the moon or the sun. But the major advantage is in deep-sky imaging.

The chip is extremely sensitive - this allows you to take excellent images of faint nebulae and galaxies even with "slow" focal ratio telescopes. You can even take colour images by using LRGB filters: You take four separate images with dedicated colour filters and stack the images in your computer. We of course offer the needed LRGB filters:
--- Baader CCD Filters (German Page) ---- Astronomik CCD Filters --- The filter support kit and the new filter wheel (see recommended accessories) are a great help for LRGB imaging. They allow you to exchange the filters much more easily without having to take the camera out of the telescope.

Efficient Peltier Cooling
Using this efficient thermo-electric cooling system the temperature can be reduced 25 centigrades below ambient temperature. This reduces thermal noise enormously.

12V - Power Supply
power supply of this camera is 12V. A cigarette lighter plug (1.8m cable) is included.

Telescope Connection
The camera has a T2 female thread (M42x0.75). This allows you to use a multitude of T2 accessories like tele-lenses, eyepiece projection adaptors, ... In addition a 1.25" adaptor is included. Thus you can attach the camera directly to your telescope.Videos Taken With the ATiK Camera
You can even take films with the ATiK Cameras. Exposure times range from 0.5 seconds to infinite. Afterwards you can use programs like GIOTTO to stack the images - the resulting very high resolution especially for moon and planets offers and image quality unheard of a few years ago!

Autoguiding
You can use the ATiK cameras for autoguiding. A custom application for autoguiding as well as Maxim DL and Astroart plug-ins are included.

Long Exposure Photography
These new ATiK cameras are ideally suited for long exposures. Data transfer to the computer is through the USB port.

High Sensitivity Monochrome Chips
The cameras are equipped with particularly powerful Sony chips. The high sensitivity enables you to use the cameras on slow focal ratio telescopes. The cameras are ideally suited for telescopes with a longer focal length. They will still show plenty of detail.

Left Image: Size comparison between the ATiK 16HR and the previous flagship of the ATiK camera line, the ATiK 2HS.
The ATiK 16 uses the Sony chip ICX-429 ALL  (Diagonal 9.49mm).
Die ATK 16 HR uses the Sony chip ICX-285 AL  (Diagonal 13.15mm).
Specifications of These Two ATiK Cameras:
 
Camera ATiK 16
 
Chip Sony Chip ICX-429 ALL ( PDF file )
Resolution 752 x 582 pixels  ( 437,664 pixels )
Chip size 7.4mm x 5.95mm - diagonal 9.49mm
Pixel size 8.6 x 8.3 um
BIT 16 BIT
Computer Port USB 1.1 - Download time max. 5s
Cooling Peltier cooling (25° below ambient temp.)
Preview function only approx. 1 second download time
Power supply 12V DC - 0.8A power consumption
Protective glass optical glass - BK-7
Camera ATiK 16 HR
 
Chip Sony Chip ICX-285 AL ( PDF file )
Resolution 1390 x 1040 pixels ( 1,445,600 pixels )
Chip size 10.2mm x 8.3mm - diagonal 13.15mm
Pixel size 6.45 x 6.45 um
BIT 16 BIT
Computer Port USB 1.1 Download time max. 15s
Cooling Peltier cooling (25° below ambient temp.)
Preview funtion only approx. 1 second download time
Power supply 12V DC - 0.8A power consumption
Protective glass optical glass - BK-7
Scope of Delivery of the ATiK 16 and ATiK 16 HR:
--  T mount female thread and 1.25" barrel
--  USB cable - length 3m
--  12V power supply - cigarette lighter plug included - length: 1.8m
--  CD ROM with drivers, software, manual
--  high quality Pelican case - for safe storage and transport
Recommended Accessories:
T2 Filter Support Kit
for LRGB imaging
further information		 IR Cut Filter
should be used if any lenses are between the camera and the object
further information		 0.5x Focal Reducer
for faster images and larger fields of view
further information		 Parallel-Serial Adaptor
allows the ATiK camera to be connected to a serial port
further information		 Camera Lens Adaptors
for your ATiK camera
further information


1.25" LRGB Filter
for 3 colour composit images
further information

Using the ATiK on a MAC Computer
Link to a free download page

Prices:
 
Item No. Short description Price - Euros incl. VAT
ATK 16 CCD monochrome camera - chip diagonal 9.49mm
T mount and 1.25" barrel		 930.-
ATK 16 HR CCD monochrome camera - chip diagonal 13.15mm
T mount and 1.25" barrel		 1765.-

Please send requests or online orders to: info@teleskop-service.se



Accessories for ATiK Cameras

Filter Wheel 1.25"
High quality filter wheel - short optical length - for 5x 1.25" filters		 Filter Support Kit
allows to change filters quickly without removing the camera		 CCD Filters
LRGB filters for 3-colour composit images		 Baader IR Cut Filter
enhances contrast whenever there is a lens between the camera and the object
0.5x Focal Reducer
for shorter exposure times and larger fields of view		 Case For ATiK Cameras
for save storage and transport		 Parallel-To-Serial Adaptor Telelens Adaptor for ATiK Cameras
Allows you to use telelenses for your ATiK camera. Also works with many other cameras


Filter Wheel For 5x 1.25" Filters

This filter wheel allows you to switch between up to 5 1.25" filters within seconds without the need to remove the camera. At the same time the filters are always safely stored. Effective against dew.



Image of the prototype. The filter wheel is black anodized. You can see the good grip of the filter wheel which allows you to switch between filters easily.
The image shows the optional 1.25" telescope connection.

 Rapid change of up to 5x 1.25" filters without taking off the camera.

-- The filter wheel is ideally suited both for photography and visual use. Within seconds you can switch between several filters.

Planetary observers can switch between their favourite colour filters to squeeze out the last bit of detail in a planet.

Deep-Sky observers can switch between various contrast filters like Skyglow filters, UHC filters, O-III filters, ...

Photographers can take 3-colour LRGB composit images. This turns a monochrome camera into a powerful colour camera.

-- With its short optical length the filter wheel can be used in most telescopes. Even many Newtonian telescopes will allow the use of the filter wheel.

-- The filter wheel can be disassembled easily.

Specifications and Scope of Delivery

Connections T2 (M42x0.75) female thread on the side of the telescope
T2 (M42x0.75) male thread on the side of the camera / eyepiece
Optical length very short ..... only 19.5mm
Filter Switch Large knurled wheel for easy and smooth switching between filters. The filters snap into position.
Material used Aluminium
Weight Lightweight ... only 260 grams

Baader CCD Filters (German page)

Astronomik CCD Filters

 Prices and Recommended Accessories
 
Item No. Short description Price - Euros incl. VAT
FIRA 1 Filter wheel for 5x 1.25" filters. T2 connection on both sides. 136.-
TS FA 1 1.25" nose piece on the side of the telescope (for 1.25" focusers) 19.-
TS FA 2

2" nose piece on the side of the telescope - only 3mm optical length

 29.-
TS T2 - 1

1.25" clamp for 1.25"eyepieces  ( eyepieces, adaptors, ... )

 21.-
TS T2 - 2 2" clamp for 2" eyepieces ( eyepieces, adaptors, ... ) 29.-
T2 T-2 ring for most common SLR cameras. Please state the exact camera type 21.-

Please send requests or online orders to: info@teleskop-service.se



Filter Support Kit (T-mount)

The filter support kit allows you to switch 1.25" filters quickly without having to remove the camera first.


An overview of available accessories:

Left of the filter support kit: Adaptations to the telescope - 2" and 1.25"
Right of the filter support kit: Adaptations for cameras and eyepieces - ATiK camera (direct adaptation), T-ring for SLR cameras, 1.25" eyepiece clamp


The filter support kit (center of image) in the visual configuration. The adaptors 1.25"-T2 and T2-1.25" are not included. The Baader filter is not included.
Switching 1.25" filters without having to take off the camera or eyepiece!

This is the very practical function of the ATiK filter support kit. The function is particularly practical for 3-colour CCD imaging because it allows you to switch the filters without the risk of losing focus. Please see the ATiK filter wheel to find another solution for this common problem!)

Of course the filter support kit is also very practical for taking images of the planets with different filters.

We offer adaptations for most telescopes - 1.25", 2" and SC thread.

You can even use normal eyepieces or other accessories with a 1.25" barrel with our optional T2-1.25" adaptor. This allows you to use the filter support kit visually, allowing you to try and compare the effect of different filters more easily.

Visual Use:

With our T2-1.25" adaptor you can attach eyepieces to the filter support kit, allowing you to use the filter support kit for visual observations.

Suggestion:

We recommend to use a separate filter support drawer for all filters which you use frequently. This makes changing filters much less time consuming and more convenient.


From left to right:
TS FA 1 .... Adaptor 1.25" on T-mount (optional)
Filter Support Body with T-mount on both sides
Filter Support Drawer for 1.25" filters
 



ATiK camera with attached filter support kit and optional 1.25" adaptor

 Practical Use:
After taking an image just remove the filter support drawer from the filter support body and insert the next drawer with a different filter. The filter will snap into position precisely. We recommend to use a separate filter support drawer for each filter.

Connections:
Telescope connection T2 (M42x0.75) female thread
Camera connection T2 (M42x0.75) male thread

Scope of Delivery:
The basic set of the filter support kit consists of one filter support body and one filter support drawer for a 1.25" filter. The filter support body has a T2 female thread at the telescope side and a T2 male thread at the camera side.

You can exchange filters without removing the camera. If you want to exchange filters more easily we recommend to use one filter drawer for each frequently used filter.

Prices:
 
Item No. Short description Price - Euros incl. VAT
Filter Einschub Filter support body including one filter support drawer. T2 connection on both sides. 62.-
Filter Schublade Extra filter support drawer. Allows you to change filters quickly. We recommend to use one filter drawer for each frequently used filter. 31.-
TS FA 1 Adaptor for 1.25" telescope focusers - 1.25" on T-mount 19.-
TS FA 2 Adaptor for 2" telescope focusers - 2" on T-mount 29.-
TS SC-T2 Adaptor for SC thread telescope connection - SC on T-mount 36.-
TS T2 - 1 Adaptor for 1.25" eyepieces on the filter support kit - for visual use 19.-

Please send requests or online orders to: info@teleskop-service.se



CCD Filter für 3Farben - Komposit Aufnahmen
Ermöglicht die Erstellung von hochwertigen Farbaufnahmen mit den empfindlichen Schwarz Weiß Kameras;

 Wir bieten Ihnen zwei verschiedene Sets an.

1,25" Astronomik CCD Filter
Komplettset inkl. IR Sperrfilter - es sind Interferenzfilter, sehr präzise Transmissionskurven - ideal für 3 Farben Komposit. Einige Referenzaufnahmen wurden mit diesen Filtern gemacht ... Link zu CCD Filter von Astronomik

1,25" Baader CCD Filter
Die Filter stellen eine preiswerte Alternative zu den Astronomik Filtern dar, es sind aber keine Interferenzfilter. Trotzdem kann man mit diesen Filtern recht schöne Ergebnisse bringen. Auch dieses Set besteht aus den drei Farbfiltern und einem IR Sperrfilter ................................................................................ Link zu CCD Filter von Baader

Please send requests or online orders to: info@teleskop-service.se



IR Sperrfilter von Baader

 1,25" Baader IR Sperrfilter - wenn Linsen im Strahlengang sind .......................................................... Euro 36,-

Objektive sind für das infrarote Licht nicht korrigiert. Der CCD Chip der Kamera ist aber auch für dieses Licht empfindlich. Der Kontrast und die Schärfe der Aufnahme würden leiden. Aus diesem Grund muß das infrarote Licht ausgesperrt werden. Das macht der IR Sperrfilter. Für das menschliche Auge erscheint der Filter klar, weil wir das infrarote Licht nicht sehen können. ........................................................................................................................................... Link zum Baader IR Sperrfilter

Please send requests or online orders to: info@teleskop-service.se



0,5 Reducer mit Filtergewinde Anschluß
Reduktion der Brennweite - Erhöhung der Lichtstärke - mehr fotografisches Feld am Himmel
insbesondere für langbrennweitige Teleskope zu empfehlen!



Lieferung in einer schönen Aufbewahrungsbox

 0,5 fach Reducer für Beobachtung und Fotografie

Der TS Reducer reduziert die Brennweite der Hauptoptik auf die Hälfte und ermöglicht so ein größeres Blickfeld. Dieser Vorteil kann sowohl in der Beobachtung, als auch in der Fotografie genutzt werden.

Adaption

Die ist beim TS Reducer besonders einfach. Er hat das 1,25" Filtereinschraubgewinde. Damit passt er problemlos in jedes 1,25" Okular oder auch in jeden 1,25" Fotoadapter, wie z.B. in den 1,25" Adapter der ATK Kameras.

Anwendungsbereiche

Fotografie:
- Vergrößerung des Bildfeldes und Verkürzung der
  Belichtungszeiten bei der Fotografie. Nicht nur für die ATK Kameras geeignet, sondern auch für:

  --- Philips Webcam  ( mehr Infos )
  --- Deep Sky Video Kamera WAT 120 ( mehr Infos )
  --- Mintron Video Kameras ( mehr Infos )

Visuelle Beobachtung:
- Erweiterung des Bildfeldes mit 1,25" Okularen. Das
  ist insbesondere bei langbrennweitigeren Geräten
  sinnvoll, wenn man ausgedehntere Himmelsobjekte
  beobachten möchte.

  Durch den geringeren Abstand Reducer / Okular
  reduziert sich der Verkürzungsfaktor auf 0,75fach.
  Dafür verschiebt sich aber der Fokus nur um 5mm
  nach innen.
Technische Daten:

Anschlußgewinde ............ Beidseitig Filtergewinde 1,25" ( M 28,5 x 0,75 )
Freier Lichtdurchlaß ......... Linsenöffnung 22,5mm
Linsen ................................ 2 Linsen für bessere Korrektur - verkittet - vergütet
Material Fassung ............. Aluminium - schwarz eloxiert
Verkürzungsfaktor ............ ca. 0,5fach - abhängig von Abstand

Verstärkung des Kompressor Faktors

Wenn zwischen dem Adapter oder Okular und dem Kompressor eine Zwischenhülse angebracht wird, vergrößert sich der Abstand und somit auch der Verkürzungsfaktor. Dazu braucht man die " TSV F ".
Tipp

Der Kompressor reduziert nicht nur die Brennweite, er verändert auch die Position des Fokus nach innen. Normalerweise besteht selbst bei Teleskopen mit knappen Fokus kein Problem mit der Schärfe Einstellung. Mit der Verlängerungshülse " TSV F " kann es aber insbesondere bei Newtons etwas eng werden.		 Preise
 
Modell Beschreibung VK-Euro
Red 0,5 Reducer 0,5fach mit beidseitigem Filtereinschraubgewinde
(visueller Einsatz - Faktor 0,75fach)		 38,-
TSV F Verlängerungshülse - beidseitiges Filtergewinde - 25mm 19,50

Please send requests or online orders to: info@teleskop-service.se



Koffer für die ATiK Kameras
Schonende Aufbewahrung und Transport für die Kameras

 Eine CCD Kamera ist ein sehr präzises Gerät. Sie sollte auch dem entsprechend transportiert und aufbewahrt werden.

Der robuste Transportkoffer für die ATK Kameras erfüllt diese Voraussetzungen. Er ist aussen aus schlagfestem Kuststoff - wasserabweisend - und innen hat er eine Form aus hartem Schaumstoff.

Damit ist die Kamera optimal geschützt. Es ist auch noch genügend Platz für Kabel und diverses Zubehör, wie Filter Einschub und Filter vorhanden.

Art. Nr. Beschreibung VK-Euro
ATK Koffer Koffer aus Kunststoff - für ATK Kameras 46,-

Please send requests or online orders to: info@teleskop-service.se



Serieller Konverter
Wenn man am Computer nur eine serielle Schnittstelle hat;

 Der Adapter erlaubt Ihnen den Anschluß an die serielle Schnittstelle an Ihrem Computer, anstelle des "parallel Ports".
 
Art. Nr. Beschreibung VK-Euro
ATK Ser Serieller Adapter für ATK Kameras 20,75

Please send requests or online orders to: info@teleskop-service.se



Anschluß an Kamera Objektive & fertige Objektive

Wenn Sie Ihr vorhandenes Kamera Objektiv an die ATK Kameras anschließen wollen - mit Fotostativ Anschluß



ATK Kamera mit Objektiv  - befestigt am
Teleskop

 Die ATK CCD Kameras können natürlich auch gut an vorhandene Kamera Objektive Objektive genutzt werden. So entstehen sehr schöne Übersichtsaufnahmen. Gerade die Kombination von kurz brennweitigen Kamera Objektiven bis 135mm mit den ATK Kameras ist eine sehr reizvolle.

Adaption an das Stativ oder Teleskop
Die Adapter haben ein 1/4" Innengewinde dabei. Damit können Sie Objektiv und Kamera auf ein beliebiges Fotostativ befestigen. Die aufsattelbaren Kamera Halterungen verschiedener Teleskope verfügen ebenfalls über dieses Gewinde, so daß Sie auch ohne Probleme die Kamera parallel zum Teleskop befestigen können.

Preise
 
Art. Nr. Beschreibung VK-Euro
135mm Objektiv Objektiv 135mm f/2,8 mit Pentax K Anschluß 179,-
50mm Objektiv Objektiv 50mm f/1,7 mit Pentax K Anschluß 96,75
Pentax K Kamera Adapter für Objetkive mit Pentax K Anschluß 47,50
Pentax S Kamera Adapter für Objektive mit dem M-42 x 1 Schraubgewinde 47,50
Olympus Kamera Adapter für Objektive mit Olympus Anschluß 50,50
Nikon Kamera Adapter für Objektive mit Nikon Anschluß 50,50
C Mount Kamera Adapter für Objektive mit C-Mount Anschluß 21,50

Please send requests or online orders to: info@teleskop-service.se



Home