Telescope-Service - Your Expert for Telescopes, Mounts, Binoculars, Spotting Scopes and Accessories. We offer a broad selection of eyepieces, filters, accessories for astro-imaging and many more interesting items.


Tripods


Camera and Video tripods, alt-azimuth mounts & further accessories
for binoculars and spotting scopes

Easy Payment: We offer our customers several easy and fast payment methods. You will receive exact payment details when ordering or on request!

Stativadapterklein.jpg (4947 Byte) Stativadapterklein.jpg (4947 Byte)
Camera and Video Tripods
everything from a low budget beginner's tripod to high quality tripods for demanding customers
Panheads and Ball Heads
These panheads and ball heads fit on most common camera tripods
Binocular Adaptor for Camera and Video Tripods Telemont - special mount for giant binoculars
A sturdy and smooth mount for large binoculars - from the horizon to the zenith
Binomountkklein.jpg (7847 Byte)
Panoramic Mount
Astronomical mount for heavy binoculars and other instruments up to 20kgs
Binomount
parallelogram style mount for binoculars up to 90mm




Camera Tripods

Tripod XT



massive tripod - load capacity up to 9kgs - very portable
Tripod VT



sturdy tripod with excellent panhead - capacity up to 8kgs - with extendable central column
Tripod 303



strong tripod - load capacity approx. 4kgs - metal panhead - extendable central column
Tripod 103



good low cost camera tripod
load capacity approx. 3kgs
extendable central column
Tripod 101



light-weight all purpose tripod for instruments up to approx. 2kgs - very portable
Tripod FT05



Ultra compact tripod for travelling (only 28cm high)
Tripod FT02



compact tabletop tripod - very sturdy - adjustable in height
Tripod FT09



Ultra-lightweight tripod (480g), extendable up to 90cm

Monopod



A monopod serves as a lightweight base for photography that doesn't require a full-sized tripod
Berlebach Tripods (German Presentation)



High quality wooden tripods made in Germa
ny
Camera Tripods Without Panhead
Triton FLX 2 - Tripod



compact but sturdy tripod with 3/8" thread, without panhead
Load capacity up to approx. 5kgs
Triton FEX 1 - Tripod



sturdy tripod with 3/8" thread, without panhead
Load capacity up to approx. 7.5kgs
Triton FGX 1 - Tripod



ultra-heavy duty tripod with 3/8" thread, without panhead
Load capacity up to approx. 10kgs


Panheads & Accessories

Triton Ballhead PH 24



compact metal ballhead with quick release plate
Triton Ballhead PH 26



Sturdy metal ballhead, capacity up to 3.8kgs. With quick release plate
Triton Ballhead PH 28



very sturdy and beautiful ballhead, capacity up to 4.2kgs. With quick release plate
Triton Ball- and Panhead PH 42



this panhead combines the advantages of a classical panhead and of a ball head.
load capacity up to approx. 4kgs
Triton Ballhead PH 46



very massive ballhead, capacity up to 5kgs, with quick release plate
Triton Panhead PH 32



sturdy panhead, very compact,
load capacity up to approx. 5kgs
Triton Action-Grip for Tripods



very easy to use "panhead" for binoculars, spotting scopes, ...
load capacity up to approx. 4kgs
Triton Super Clamp



multi-purpose clamp that replaces a tripod for many applications


Tripod XT
load capacity up to approx. 9kgs

 


Robust panhead with beauticul and ergonomic grips. The quick-levelling device integrated into the tripod allows you to level the panhead within seconds using the integrated circular level.

TS Tripod XT

A video and camera tripod for heavy loads at a surprisingly low weight of under 4kgs (including the head!)

Instruments with a weight of up to 9kgs are solidly held with good vibration dampening properties - even with fully extended legs.

The robust 3-way panhead is the heart of this tripod. It provides smooth movements in all axes as well as a secure lock in any position by use of large locking jaws.

The panhead is of course made of metal. It is equipped with a quick release plate for using different equipment on one tripod.


3-Way-movement
you can move the panhead in three separate axes:
- horizontal
- vertical
- tilt up to 90 degrees to the right. This axis is important for photography.

Specifications:

Load Capacity 9 kgs
Scope of delivery Tripod, Panhead, Carry Case
Height min / max 76 cm / 155 cm
Total weight 3.2 kgs incl. panhead - lightweight
Weight of panhead 1.4 kgs
Connecting thread 1/4" camera thread at both ends. Adaptors for 3/8" cameras are available separately.
Quick release device yes
Levelling precise and quick levelling device with integrated circular level
The tripod is ideally suited for large photo and video cameras, binoculars up to 100mm, spotting scopes and even small telescopes.
The tripod is adjustable in height between 76cm and 155cm. The broad "shoulders" give the entire tripod a surprising stability at a low weight. The legs have rubber feet that can be retracted to reveal metal points. The rubber feet are used on hard surfaces, the metal points are used in the field.



A beautiful and practical carry case with a separate compartment for accessories is included!

Price:
 
Item No Short description Price - SEK   incl. VAT

 F XT

Tripod incl. panhead, quick release plate, carry case 1625.-
Stativadapter Tripod adaptor for many binoculars 199.-
PS15 Adaptor plate for telescopes with tube rings 199.-


Please send requests or online orders to: sales@teleskop-service.se



Tripod VT
load capacity up to approx. 8kgs - with extendable central column


 


Robust panhead with beauticul and ergonomic grips.

TS Tripod VT

A video and camera tripod for heavy loads at a surprisingly low weight of under 4kgs (including the head!)

Instruments with a weight of up to 8kgs are solidly held with good vibration dampening properties - even with fully extended legs.

The robust 3-way panhead is the heart of this tripod. It provides smooth movements in all axes as well as a secure lock in any position by use of large locking jaws.

The panhead is of course made of metal. It is equipped with a quick release plate for using different equipment on one tripod.


3-Way-movement
you can move the panhead in three separate axes:
- horizontal
- vertical
- tilt up to 90 degrees to the right. This axis is important for photography.

Extendable Central Column

A particularly comfortable feature is the central column that can be extended by about 40cm. This allows you to adjust the operating height of the tripod within seconds. Even fully extended the stability of the tripod is still very good.

Specifications:

Load Capacity 8 kgs
Scope of delivery Tripod, Panhead, Carry Case
Height min / max 83 cm / 172 cm
Total weight 3.2 kgs incl. panhead - lightweight
Weight of panhead 1.4 kgs
Connecting thread 1/4" camera thread at both ends. Adaptors for 3/8" cameras are available separately.
Quick release device yes
Levelling precise levelling with two integrated levels
The tripod is ideally suited for large photo and video cameras, binoculars up to 100mm, spotting scopes and even small telescopes.
The legs have rubber feet that can be retracted to reveal metal points. The rubber feet are used on hard surfaces, the metal points are used in the field. Drop Control - The friction control is infinitely variable. By turning the central column you can choose the right setting for your particular needs.



A beautiful and practical carry case with a separate compartment for accessories is included!

Price:
 
Item No. Short description Price - SEK incl. VAT

 F VT

Tripod incl. panhead, quick release plate, carry case - load capacity approx. 8kgs 1400.-
Stativadapter Tripod adaptor for many binoculars 199.-
PS15 Adaptor plate for telescopes with tube rings 199.-


Please send requests or online orders to: sales@teleskop-service.se



Tripod F303 - Sturdy Tripod for Instruments up to approx. 4kgs



TS camera tripod with sturdy metal panhead

 

TS Aluminium Tripod - Load Capacity approx. 4kgs

A light-weight, portable and above all affordable aluminium camera tripod with metal panhead and integrated circular level. The tripod weighs approximately 2.5kgs which makes it very portable.

The panhead is a solid all metal design

Infinitely adjustable in height up to 155cm. The central column can be extended. This allows you to adjust the operating height precisely within seconds.
Quick release device allows to attach and take off a camera within a few seconds.
Integrated circular level in the base of the panhead
All metal panhead - this offers a generous stability.
Camera thread = 1/4" standard thread. Adaptors for 3/8" cameras are available separately.
The panhead can be removed from the tripod. The thread connecting the panhead with the tripod is the large camera thread 3/8"

The tripod is suited for medium sized binoculars up to 80mm, cameras with telelenses and other medium weight accessories. Heavier accessories can be used with slightly reduced stability.

Item No. Short description Price - SEK incl. VAT
F 303 Camera tripod - max. height 165cm - with carry bag 799.-
The legs have rubber feet that can be retracted to reveal metal points. The rubber feet are used on hard surfaces, the metal points are used in the field. The panhead is an all metal design. It is very sturdy and has an integrated circular level. You can tilt the panhead by 90° - an important function for photography.
A beautiful and practical carry case with a separate compartment for accessories is included! The tripod has an extendable central column with a 3/8" thread on top. This allows you to attach various other panheads if you desire to do so. Likewise the panhead can be attached to any camera tripod with the large 3/8" thread.


Please send requests or online orders to: sales@teleskop-service.se



Tripod F103
Light-weight multi-purpose tripod for cameras and small spotting scopes.

Using the Tripod 103:

Our TS Tripod F103 is made for users looking for a light-weight, but solid tripod at a small budget.

It accepts normal cameras, digital cameras, camcorders and other accessories using the standard 1/4" thread. It is also suited for smaller binoculars, spotting scopes and compact telescopes.

Depending on the lever arm the load capacity of this tripod is approx. 3kgs

Features:

>> bload capacity of the tripod F103 is approx. 3kgs, depending on the lever arm
>> light weight with a generous stability
>> net weight approx. 1.4kgs (w/o carry bag)
>> 3-way panhead with quick release plate
>> tripod legs infinitely adjustable in height. Can be locked securely in height.
>> integrated level for precise setup
>> incl. Nylon carry case with strap

 



The legs have rubber feet that can be retracted to reveal metal points. The rubber feet are used on hard surfaces ...


... and the metal points are used in the field.

Specifications and Scope of Delivery:
 

>> weight approx. 1.4kgs
>> max. height approx. 152cm
>> min. height for transport approx. 60cm
 
Price
 
Item No. Short description Price - SEK  incl. VAT
F 103 camera tripod with carry bag and quick release plate - adjustable in height 335.-

 


Please send requests or online orders to: sales@teleskop-service.se



Tripod F101
low budget and light weight camera tripod

Light-weight Aluminium Tripod - For Instruments up to 2kgs

A very light-weight and portable aluminium tripod with panhead and integrated level. The tripod weighs only 1.5kgs.

Features:

Infinitely adjustable in height up to 165cm. The central column can be extended. This allows you to adjust operating height easily within seconds.
Quick release device allows to attach and take off a camera within a few seconds.
Integrated levels in the tripod and the panhead
Hook for accessories or extra weight. If you add weight here you will get better vibration dampening properties.
Incl. carry bag with strap

The tripod has the 1/4" standard thread for cameras or binoculars

Item No Short description Price - SEK incl. VAT
F 101 Camera tripod incl. carry bag. Max. height approx. 165cm 220.-

Please send requests or online orders to: sales@teleskop-service.se



Table-Top Tripod T - An Ultra-Portable and Sturdy Table-Top Tripod



The TS spotting scope 55mm on the Table-Top tripod. The tripod is on maximum height.

The TS table-top tripod T is an ideal companion for travelling. It is extremely compact and fits easily into your travelling luggage. The weight of the tripod is under one kilogram., which means that you can carry it along even on long mountain trips without extra strain.

The tripod is a solid metal design. The panhead is also made of metal. This allows you to put accessories of up to approx. 3kgs on top of the tripod.


Specifications:
Connecting thread standard 1/4" thread (most cameras, spotting scopes, binoculars, ....)
Dimensions folded down approx. 40cm long
Height Variable between 30 and 40cm
Movement Smooth horizontal movement.

Fine and coarse movement in altitude.

Suggestion:
You can even point your instrument towards the zenith (90 degrees up). All you need to do is to attach the spotting scope or camera the"wrong" way around (with the altitude slow motion control pointing away from the user.

Item No Short description Price - SEK  incl. VAT

F T02

compact and sturdy table-top tripod 210.-


Please send requests or online orders to: sales@teleskop-service.se



Binocular Adaptors for Camera Tripods and Alt-Azimuth Mounts

Stativadapter.jpg (6997 Byte)

Solid All-Metal Binocular Adaptor for Camera Tripods

This adaptor is suitable for nearly all binoculars offering the 1/4" standard thread at the front. By removing the cap on the cenral axis of a pair of binoculars you will usually reveal the 1/4" thread.

This adaptor fits directly into this thread. You can fix your binoculars without any tool using the large knurled knob.

In the base of the adaptor is another 1/4" thread. This will fit onto most standard camera tripods. It fits onto all of the above TS tripods.

As a result your binoculars are held free of vibrations by a tripod, allowing you to observe relaxed for a long time.

Item No Short description Price - SEK  incl. VAT
Stativadapter Adaptor for putting binoculars onto camera tripods 199.-

PSfotoFerngl.jpg (18052 Byte)

PS Foto - Short Dovetail Plate with 1/4" Camera Thread

This short dovetail plate fits onto many astronomical mounts which offer a quick release device. Examples are Vixen, Celestron, Orion, TS, ... mounts. There are also some alt-azimuth mounts like the TS AZ and the TS Panoramic Mount which are or can be equipped with a quick release device.

Binoculars are attached to this plate as they are attached to a camera tripod. Some binoculars (left image) already have a tripod adaptor, for most others we offer a tripod adaptor (see above).

Uses
For adapting Spotting Scopes, Binoculars, telelenses, cameras, ... on mounts with Vixen format quick release devices. With the Baader dovetail clamp you can also attach them to a camera tripod.

This plate is particularly suited for the TS Panoramic Mount. It allows you to attach and release your binoculars, spotting scopes, ... within seconds. (TS Panoramic Mount)

PSfoto.jpg (1783 Byte)

Prices
k

Item No Short description Price - SEK incl. VAT
PS Foto Short dovetail plate with 1/4" male camera thread 199.-


Please send requests or online orders to: sales@teleskop-service.se



Telemont - A Simple To Use Mount for Large Binoculars



The TS 20x90 isn't a light-weight at 4kgs, but the Telemont easily carries its load. The tripod is a Berlebach model.
The Telemont is a clever and easy to use alt-azimuth mount for binoculars. It allows you to observe any object from the horizon to the zenith. The binoculars will be balanced in the altitude axis at any time (and also in the azimuth axis with the optional counterweight shaft and counterweight), thus allowing smooth movements in all axes.

Terrestrial Use
Without the need to use any clamps or slow-motion controls the Telemont offers smooth and easy movements in both axes. This is particularly important if you want to observe moving objects (birds, ships, ...)

Astronomical Use
The main advantage of the telemont is its capability to observe any point from the horizon to the zenith. The binoculars sit on the side of the mount which means that you will always be able to place yourself under the binoculars. At the same time the binoculars are always perfectly balanced in altitude which allows you to move them without the need of clamps.

Load Capacity
The Telemont carries binoculars, spotting scopes and even telescopes up to approx. 10kgs depending on the tripod used.

Upwards of 4kgs we recommend to use the optional counterweight which can be attached to the Telemont using the also optional counterweight shaft (see image below). With this counterweight the telemont will be balanced in both axes.



The heart of the Telemont is the Tele-Optic Giro Mini. The Giro Mini is available in silver-grey and black. Here you can see the counterweight shaft and counterweight which are used if you are using a very heavy instrument.

The Telemont consists of:
 
Alt-Azimuth mount Giro Mini with M10 or 3/8" tripod connection. Can be used on most camera tripods. If your tripod has the 1/4" thread an adaptor is available separately.
Baader quick release device for fixing the L-bracket.
L -bracket
1/4" thumbscrew for attaching the binoculars. Binoculars without integrated tripod adaptor require the optional external tripod adaptor.

Tripod Connection
The Telemont has an M10 thread in the base. This allows you to attach the mount to any tripod with an M10 or 3/8" thread.

Many camera tripods have the 3/8" thread. If your tripod has the smaller 1/4" thread an adaptor is available separately.

The Telemont will also fit onto most astronomical tripds (Vixen GP, TS Astro-5, ...)

An Overview of TS Binoculars

Prices:
 
Item No Short description Price - SEK  incl. VAT
Telemont Alt-azimuth mount for heavy binoculars - without tripod.
The Telemont consists of: Giro Mini mount, quick release device, L-bracket
2590.-
Giro Gegengewicht Counterweight shaft for the Telemont, the Giro Mini and the Giro. You can use counterweights compatible with the Vixen norm (Vixen GP, TS Astro-5, Synta EQ5, ...) Various counterweights are available from TS. 285.-
L Halter L-bracket + 1/4" thumbscrew. If you already own a Giro or Giro Mini mount 715.-
32055 Adaptor that turns the 1/4" screw of many camera tripods into a 3/8" screw 19.-


Please send requests or online orders to: sales@teleskop-service.se



 

Binomount - Easy Astronomical Observing With Binoculars

Binomount.jpg (15563 Byte)
The TS Binomount on the optional tripod

Large binoculars in particular are much fun to use. They offer large fields of view and allow you to use both eyes. But observing comfort depends very much on the magnification and weight - at more than 10x and approx. 900 grams you get shaky images when holding the binoculars in your hands. As a consequence you will see less details and will find observing to be quite straining after a while.

Normal camera tripods are a big improvement, but they lack the possibility for smooth movements in both axes. You will also find it a bit difficult to look at high up objects like an airplane or the night sky.

The TS Binomount is the solution to this problem:

Smooth Movements in Both Axes - Up To The Zenith (90° Up)
The binoculars are directly attached to the L-adaptor on the parallelogram style mount. It can be properly balanced by adjusting the counterweight. Movements are controlled by a friction clutch, you do not need to loosen any clamps. You just take the binoculars, move them into the proper position and they will stay that way - just enjoy observing!

Which Binoculars Can Be Used?
All binoculars up to approx. 4.5kgs work on the TS Binomount. If the binoculars have a 1/4" camera thread on the front side you need no further adaptation. If your binoculars have an integrated tripod adaptor with 1/4" thread at the bottom end a small modification needs to be done to the Binomount. We can do this for you, the modification takes about two weeks on average. Please always state the exact binocular type so that we can check whether any modification needs to be made.

The TS Binomount can be used with nearly all of our binoculars up to 100mm aperture.

BinomountHklein.jpg (23557 Byte) BinomountZklein.jpg (22234 Byte)

Observing with the TS Binomount
On the images to the left you can see how comfortable to use the TS Binomount is. You can stand behind the binoculars relaxedly and concentrate on what you can see. As a result you see more detail than you would see in free-hand observations.

Within seconds you can switch from observing the horizon to observing the sky. You can observe planes, birds or objects in our milky-way with the same ease and comfort. You will also reach the zenith (90° above the horizon) easily.

Prices:
.
Item No. Short description Price - SEK  incl. VAT
Binomount Parallelogram style mount for binoculars. Without tripod. With adaptation for standard camera tripods 2790.-
Binomount Stativ Parallelogram style mount for binoculars. With adjustable height metal tripod (up to approx. 170cm 4100.-


Please send requests or online orders to: sales@teleskop-service.se



Triton FLX 2 - Compact but Sturdy Tripod With 3/8" Thread
load capacity up to 5kgs



The angle of the three legs can be adjusted individually. This allows you to get a perpendicular setup even on sloping grounds, or when one of the legs stands on a step.
Items shown on this image may be optional. The tripod on the picture is the larger FEX-1, but the function is identical for the FLX2.

Fields of Use - Triton FLX 2

... This tripod is suitable for nearly all photographical applications
... The extentable central column has threads on top and underneath. Panheads can be attached in both positions. The lower position is for instance perfectly suited for macro photography.
... The angle of the three legs can be adjusted individually.
... The tripod has a load capacity of approximately 5kgs, depending on the panhead and lever arm. It is also very compact which makes it ideal for transportable use.

Specifications:

... extendable central column, can be locked in any position
... max. height (without panhead) approx. 160cm. With (for example) PH 32 panhead the operating height is up to 172cm
... min. height with panhead attached under the tripod, e.g. for macro photography: approx. 7.5cm
... transport length approx. 56cm
... weight only approx. 2.1kgs
... connecting thread for panheads: 3/8" UNC standard thread. You can attach most common camera panheads which feature the 3/8" thread

Scope of Delivery:

Tripod and carry case
no panhead is included in the scope of delivery
Spike feet (3pcs) to replace the soft rubber tips if desired.
The above image shows the larger FEX-1 tripod. However, all functions are the same with the FLX-2.
Price:

Item No. Short description Price - SEK  incl. VAT
FLX 2 Triton FLX 2 tripod - 2x 3/8" connecting thread.
No panhead is included.
615.-
Suitable Ball Heads and Panheads for this Tripod

The tripod has the standard 3/8" thread. This allows you to attach most photographical panheads.

We offer a broad selection of panheads for all applications. Please click the picture to find the panhead presentation!


Please send requests or online orders to: sales@teleskop-service.se



Triton FEX 1 - Sturdy Tripod With 3/8" Thread
load capacity up to 7.5kgs



The angle of the three legs can be adjusted individually. This allows you to get a perpendicular setup even on sloping grounds, or when one of the legs stands on a step.
Items shown on this image may be optional.

Fields of Use - Triton FEX 1

... This tripod is suitable for nearly all photographical applications
... The extentable central column has threads on top and underneath. Panheads can be attached in both positions. The lower position is for instance perfectly suited for macro photography.
... The angle of the three legs can be adjusted individually.
... The tripod has a load capacity of approximately 7.5kgs, depending on the panhead and lever arm.

Specifications:

... extendable central column, can be locked in any position
... max. height (without panhead) approx. 182cm
... min. height with panhead attached under the tripod, e.g. for macro photography: approx. 7.5cm
... transport length approx. 61.5cm
... weight only approx. 2.6kgs
... connecting thread for panheads: 3/8" UNC standard thread. You can attach most common camera panheads which feature the 3/8" thread

Scope of Delivery:

Tripod and carry case
no panhead is included in the scope of delivery
Price:

Item No. Short description Price - SEK  incl. VAT
FEX 1 Triton FEX 1 tripod - 2x 3/8" connecting thread.
No panhead is included.
875.-
Suitable Ball Heads and Panheads for this Tripod

The tripod has the standard 3/8" thread. This allows you to attach most photographical panheads.

We offer a broad selection of panheads for all applications. Please click the picture to find the panhead presentation!

Please send requests or online orders to: sales@teleskop-service.se



Triton FGX 1 - Heavy Duty Tripod
load capacity up to approx. 10kgs



 

Fields of Use - Triton FGX 1

- a particularly heavy-duty tripod for heavy loads
- very good stability even with tripod fully extended (180cm operating height)
- for demanding imaging and video applications. Free of vibrations even with wind


Specifications:

- weight approx. 4kgs
- max. height over 180cm
- extendable central column
- tripod legs are fixed with struts against the central column


Scope of Delivery:

- Tripod with carry case
- No panhead is included


Price:

Item No. Short description Price - SEK incl. VAT
FGX 1 Triton FGX 1 tripod - 3/8" connecting thread
No panhead is included
1795.-
Suitable Ball Heads and Panheads for this Tripod

The tripod has the standard 3/8" thread. This allows you to attach most photographical panheads.

We offer a broad selection of panheads for all applications. Please click the picture to find the panhead presentation!

Please send requests or online orders to: sales@teleskop-service.se



Triton - Super Clamp
This clamp serves as a replacement for a tripod in many applications - ideal for travelling

Triton Super Clamp - left: open / right: closed

The TRITON Super Clamp can oftentimes replace a tripod. It can be clamped to a tree's branch, a park bench, a handrail, ... Then you can attach a panhead or ball head on it for visual or photographical uses.

The clamp will fit in many places and can clamp parts as large as 5.5cm. With the long handle you can apply enough pressure to assure a firm hold. The clamp is made of metal to withstand this strain.
Specifications:

-- solid metal clamp
-- 1/4" and 3/8" connections (standard threads for camera accessories etc.)
-- weight only approx. 420g
Super Clamp with optional panhead PH 24. You can hold a pair of binoculars with the Super Clamp even if it does not have a tripod connector. (Panhead and Binocular shown here are optional)
   
The Super Clamp can replace a tripod in many situations - like here where it is clamped to a park bench. Another application where the Super Clamp serves to replace a tripod.
Price:

Item No. Short description Price - SEK  incl. VAT
Superklemme 1 Universal clamp for panheads, ball heads, ... 260.-
Suitable Ball Heads and Panheads for this Tripod

The tripod has the standard 3/8" thread. This allows you to attach most photographical panheads.

We offer a broad selection of panheads for all applications. Please click the picture to find the panhead presentation!

Please send requests or online orders to: sales@teleskop-service.se



Triton - Panhead PH 24
compact dimensions, load capacity up to approx. 2.2kgs

Triton Ballhead PH 24

A good quality compact ballhead for photography.

Metal design.


Specifications:

-- simple operation
-- load capacity up to approx. 2.2kgs depending on the lever arm

-- quick release saddle plate mechanism with security catch. One quick release plate is included.
-- tripod connection 3/8" and 1/4"
-- camera connection by quick release plate: 1/4"
-- weight approx. 600g

This ballhead is very compact and can be used even on small camera tripods. Tripod connection is through the standard 3/8" thread, a 1/4" adaptor is available optionally. This means that you can use nearly all common camera tripods on the market.
Item No. Short description Price - SEK  incl. VAT
PH 24 Triton ballhead PH 24, including quick release plate utgått

Triton PH 24 in action - shown here with MTO 500 tele lens and an SLR camera on the Triton FLX2 tripod.

Suitable Tripods

This panhead fits onto most standard camera tripods using the 3/8" thread. We offer a selection of tripods, too. Please click onto the right image to get to the tripod presentation.

Please send requests or online orders to: sales@teleskop-service.se



Triton - Panhead PH 26
compact dimensions, load capacity up to approx. 3.8kgs

Triton Ballhead PH 26

A good quality and sturdy ballhead for photography.

Metal design.


Specifications:

-- simple operation
-- load capacity up to approx. 3.8kgs depending on the lever arm

-- quick release saddle plate mechanism with security catch. One quick release plate is included.
-- tripod connection 3/8" and 1/4"
-- camera connection by quick release plate: 1/4"
-- weight approx. 600g
-- height approx. 11cm
-- integrated circular level

This ballhead is very sturdy and best used on medium-sized camera tripods. Tripod connection is through the standard 3/8" thread, a 1/4" adaptor is available optionally. This means that you can use nearly all common camera tripods on the market.

Item No. Short description Price - SEK  incl. VAT
PH 26 Triton ballhead PH 26, including quick release plate utgått
Suitable Tripods

This panhead fits onto most standard camera tripods using the 3/8" thread. We offer a selection of tripods, too. Please click onto the right image to get to the tripod presentation.


Please send requests or online orders to: sales@teleskop-service.se



Triton - Panhead PH 28
compact dimensions, load capacity up to approx. 4.2kgs

Triton Ballhead PH 28

A good quality and sturdy ballhead for photography.

Metal design.


Specifications:

-- simple operation
-- load capacity up to approx. 4.2kgs depending on the lever arm

-- quick release saddle plate mechanism with security catch. One quick release plate is included.
-- tripod connection 3/8" and 1/4"
-- camera connection by quick release plate: 1/4"
-- weight approx. 440g
-- height approx. 9.8cm
-- integrated level

This ballhead is very sturdy and best used on medium-sized camera tripods. Tripod connection is through the standard 3/8" thread, a 1/4" adaptor is available optionally. This means that you can use nearly all common camera tripods on the market.
Item No. Short description Price - SEK incl. VAT
PH 28 Triton ballhead PH 28, including quick release plate 460.-
Suitable Tripods

This panhead fits onto most standard camera tripods using the 3/8" thread. We offer a selection of tripods, too. Please click onto the right image to get to the tripod presentation.


Please send requests or online orders to: sales@teleskop-service.se



Triton - Panhead PH 46
compact dimensions, load capacity up to approx. 5kgs

Triton Ballhead PH 26

A very sturdy ballhead for photography.

Metal design.


Specifications:

-- simple operation
-- load capacity up to approx. 5kgs depending on the lever arm

-- quick release saddle plate mechanism with security catch. Twoquick release plates are included.
-- tripod connection 3/8" and 1/4"
-- camera connection by quick release plate: 1/4"
-- weight approx. 1kg
-- height approx. 14.5cm
-- integrated level

This ballhead is extremely sturdy and best used on medium-to-large sized camera tripods. Tripod connection is through the standard 3/8" thread, a 1/4" adaptor is available optionally. This means that you can use nearly all common camera tripods on the market.
Item No. Short description Price - SEK  incl. VAT
PH 46 Triton ballhead PH 46, including two quick release plates 720.-
Suitable Tripods

This panhead fits onto most standard camera tripods using the 3/8" thread. We offer a selection of tripods, too. Please click onto the right image to get to the tripod presentation.


Please send requests or online orders to: sales@teleskop-service.se



Triton - Panhead PH 32
compact dimensions, load capacity up to approx. 5kgs

Triton Panhead PH 32

A good quality compact panhead for photography.

Metal design.


Specifications:

-- simple operation
-- load capacity up to approx. 5kgs depending on the lever arm

-- quick release saddle plate mechanism with security catch. One quick release plate is included.
-- tripod connection 3/8" and 1/4"
-- camera connection by quick release plate: 1/4"
-- weight approx. 1kg

The panhead is particularly compact, with short handles that can even be removed for transport. It can be moved in three axes and locked in nearly any position.

If you do not lock the handles with full force then you effectively have a friction clutch that allows you to move the panhead without the need to loosen the clamps first.

Item No. Short description Price - SEK  incl. VAT
PH 32 Triton 3-way panhead PH 32 including one quick release plate. 405.-

Suitable Tripods

This panhead fits onto most standard camera tripods using the 3/8" thread. We offer a selection of tripods, too. Please click onto the right image to get to the tripod presentation.

Please send requests or online orders to: sales@teleskop-service.se



Triton - Ball Head & Panhead PH 42
An extremely versatile panhead that combines the advantages of a classical panhead and a normal ball head
load capacity up to approx. 4kgs


 


The Triton PH 42 combines in a compact body the advantages of a classical panhead and of a ball head. It's load capacity is up to approx. 4kgs.

Versatility:

Like a ball head the PH 42 can be moved in practically all directions freely. Just loosen the locking screw on the side of the head and move the ball part of the head in whichever direction you desire. You can even tilt the camera upright or even head over, if ever the need arises.

A classical panhead on the other hand has the advantage that it can be pointed towards the zenith more easily than a normal ball head., and the right-left motion is usually easier in such heads. The PH 42 also offers these advantages!

Quick Release Plate:

Ball heads usually don't have a quick release saddle plate. The PH 42 offers this practical feature that allows you to attach or remove your camera from the head within a few seconds.
 
Item No. Short description Price - SEK incl. VAT
PH 42 PH 42 Panoramic ball head made of metal
including one quick release plate
575.-

Suitable Tripods

This panhead fits onto most standard camera tripods using the 3/8" thread. We offer a selection of tripods, too. Please click onto the right image to get to the tripod presentation.


Please send requests or online orders to: sales@teleskop-service.se



Triton Action - Grip TH 56 for Camera Tripods
Ideal for intuitive use and for following moving objects with binoculars
load capacity up to approx. 4kgs


The Triton Action Grip is an enormously practical tool for nature observers and photographers who desire to follow moving objects.

How to Use The Action Grip:

It's really incredibly easy and intuitive.

The binoculars or camera are connected to the Action Grip using its quick release plate.

As long as you do not touch the grip it will remain locked in position. Once you pull the security handle (see image) you can freely move the Action Grip like a ball head, but with better steerability and comfort because of the ergonomic shape of the head.

If at any time you let the grip go it will stay securely in position, so human error is nearly made impossible.

The Triton Action Grip fits easily on nearly all camera tripods.

If you also need a fitting tripod please check our offers on this page or just send us your request by e-mail.

The Triton Action Grip is Suitable For:

In general you can attach any equipment up to approx. 4kgs (depending on the lever arm. For use near the horizon even larger weights are possible). Connection is through the standard 1/4" UNC camera thread.

Photography ..... During sporting events or when following other moving objects with your camera the Actioni Grip is very practical. The camera is pointed at any object within seconds, and if in the heat of the moment you normally sometimes forget to clamp a panhead again this can't happen with the Action-Grip with its security handle.

This allows you to put all your concentration where it should be: The image.

Visual Observing ..... Both spotting scopes and binoculars fit well onto the action grip. Since the grip is so easy to use you can concentrate on observing rather than on how to operate the mount.

A nice side-effect of the grip's upright dimensions is that when you point your binoculars near the zenith you will get a little bit away from the tripod for more comfortable observing.

Specifications:

Weight approx. 900g
Height 23cm
Tripod connection 3/8" thread - fits on most standard camera tripods
Instrument connection 1/4" thread through quick release plate

Price:

Item No. Short description Price - SEK incl. VAT
PH 56 Triton PH 56 Action Grip with one quick release plate 575.-
32055 Adaptor 1/4" inside - 3/8" outside. Allows you to connect the panhead to a tripod with 1/4" thread or to connect accessories with 3/8" thread to the panhead's 1/4" thread. 19.-
This is how easy to use the Action Grip - only one hand is needed for the operation of the Action Grip, no need to busy yourself with handles, clamps, screws, ...
Suitable Tripods

This panhead fits onto most standard camera tripods using the 3/8" thread. We offer a selection of tripods, too. Please click onto the right image to get to the tripod presentation.

Please send requests or online orders to: sales@teleskop-service.se



Binoculars
Home